SMI 1.0″ FF SnapLock PANEL PROFILE
Panel Information
Panel Type
Standing Seam
Panel Seam
SnapLock
Panel Width
16″
Seam Height
1″
Panel Material
22 ga—24 ga
Panel Surface
Smooth / Embossed Optional
Panel Clip
None
Minimum Slope
3/12
Substrate
Plywood
Panel Testing
Uplift Resistance
UL 90
Hail Rating
Class 4 Impact UL 2218
Fire Rating
UL Class A
Texas Dept. of Insurance Approval
RC-560
Panel Notes
With this 24 GA, 16′′ wide panel, you may opt to use heavier gauge coil and narrower panel widths. Fastener spacing will not change.
This panel uses a 20′′ coil. Maximum coil width of 24′′.
This panel uses 4-1/16′′ of material to form the panel.
If you take the square footage of the roof and multiply that by 1.25, the total will be the amount of coil needed to manufacture the panels.
This panel is NOT approved for Weathertight Warranties.
Available Colors
Environmentally Smart Colors — Designed Energy Efficient
Ash Gray
Burgandy
Charcoal Gray
Colonial Red
Dark Bronze
Dove Gray
Evergreen
Hartford Green
Hemlock Green
Mansard Brown
Matte Black
Medium Bronze
Patina Green
Regal Blue
Regal Red
Regal White
Sandstone
Sierra Tan
Slate Blue
Slate Gray
Solar White
Stone White
Surrey Beige
Terra Cotta
Metallic Colors
Silver
Copper
Champagne
Pre-Weathered GALVALUME®
Weathered Colors
GALV-TENTM Raw
COPPER-TENTM Raw
COR-TEN AZP® Raw
Non-Painted Colors
Acrylic-Coated Galvalume®
Vintage®
Colors shown are matched as accurately as possible, but may vary slightly from finished product. These rich and vibrant colors are produced with either Kynar 500® or Hylar 5000® resins, which provide superior color retention and allow Sheffield Metals to offer non-prorated coating warranties for most applications. Coating warranty varies for Regal Red, Matte Black, Copper, Champagne, Silver, and Pre-Weathered Galvalume. Steelscape’s Vintage carries a 20 year Finish Warranty. Please contact your representative for more information.
Galvalume® is a registered trademark of BIEC International Inc. l Hylar 5000® is a registered trademark of Solvay Solexis, Inc. l Kynar 500® is a registered trademark belonging to Arkema Inc. Cor-Ten AZP® is a registered trademark and the USS in Circle, Weathered Metal SeriesTM, Galv-TenTM, and Copper-TenTM are trademarks of United States Steel Corporation. All trademarks are used under license of the United States Steel Corporation.
